View DF5A-10DS-5C_195218.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

5mm Pitch Miniature Potting Connector for Secondary Power Supply
DF5 Series
sFeatures
1. Potting Product
This connector is capable of potting 9mm maximum, and 22.5mm mounting height is a low profile. (Figure 1). Single row type
2. Prevent Mis-insertion
When the socket and pin header are mated, this connector is equipped with a mechanism to prevent reverse insertion or dissimilar contact insertion.
3. Means to Prevent Solder Cracks
The pin header employs glass enforced resin, and takes countermeasures to prevent solder cracks due to heat shrinkage.
Figure 1-1
4. Prevent Reverse Insertion in Printed Board
Boss is added to the pin header, and prevents reverse insertion in the printed board.
Double row type
5. Full Lock Mechanism
The outer lock system employs full lock mechanism.
6. Current Capacity of 8A
Power can be supplied at 8 A maximum. Specification will change according to applicable cable, number of contacts, number of rows. For further information, refer to product specifications as listed on next page.
Figure 1-2
sApplications
Business machines, industrial equipment, consumer appliances (hot water supply, washing machines, refrigerator) etc.
B85
sProduct Specifications
No. of rows Single row No. of contacts 2 to 10 4 6 8 10 12 14 16 AWG#18 AWG#20 AWG#22 8A 6A 5A 8A 6A 5A 8A 6A 5A 7A 6A 5A 7A 6A 5A 7A 6A 4A 7A 5A 4A 7A 5A 4A 500V AC 500V DC 1500V AC/1 minute 100mA Measured with 1.140.002mm steel pin Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40c and humidity of 90% to 95% (-55c: 30 minutes15 to 35c: 10 minutes85c: 30 minutes5 to 35c: 10 minutes ) 5 cycles 30 cycles Flow: 260c for 10 seconds Manual soldering: 300c for 3 seconds Operating Temperature Range Operating Moisture Range -35 to +85c(Note 1) 20 to 80%
Rating
Current rating Double row
Storage Temperature Range Storage Humidity Range
-10 to +60c(Note 2) 40 to 70%(Note 2)
Voltage rating Item 1. Insulation Resistance 2. Withstanding voltage 3. Contact Resistance 4. Single Insertior/ Extraction Force 5. Vibration 6. Humidity (Steady state) 7. Temperature Cycle 8. Durability (Mating/un-mating) 9.Resistance to Soldering heat
Specification 1000M ohms min. No flashover or insulation breakdown. 30m ohms max. 0.3N (30gt) min., 4.5N (450gt) max. No electrical discontinuity of 10s or more Contact resistance: 30m ohms max., Insulation resistance: 500M ohms min.
Condition
No damage, cracks, or parts looseness.
Contact resistance: 30m ohms max. No deformation of components affecting performance.
Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Product Crimping Socket Crimping Contact for Socket Pin header Part Insulator Contact Insulator Contact Material Polyamide Phosphor bronze Polyamide Brass Finish White Tin plated Beige Tin plated Remarks UL94V-0 -------------------UL94V-0 --------------------
Note: Hirose's tin plating process takes measures against whisker.
sOrdering Information
qConnector
DF5A
1 1 2 3
-*S - 5 C
2 4 5 3 4 5
Contact Pitch: 5mm Contact type C : Crimping Socket DSA : Straight pin header
Series Name: DF 5A Number of contacts: Single row: 2 to 10 Double row: 4 to 10 Connector type S : Single row socket DS : Double row socket P : Single row header DP : Double row header
qContact
DF5A - 1822 SCF
1 1
Applicable cable type None: UL 1007 A: UL 1015 Applicable cable size 1822: AWG#18~#22
2 3
3
packaging type SCF : Socket contact, reel packaging SC : Socket contact, bag packaging
2
B86
sSingle Row Socket
Contact Inserted
Product No DF5A- 2S-5C DF5A- 3S-5C DF5A- 4S-5C DF5A- 5S-5C DF5A- 6S-5C DF5A- 7S-5C DF5A- 8S-5C DF5A- 9S-5C DF5A-10S-5C
CL No. 676-0007-8 676-0008-0 676-0009-3 676-0010-2 676-0011-5 676-0012-8 676-0013-0 676-0014-3 676-0015-6
Number of Contacts 2 3 4 5 6 7 8 9 10
A 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0
B 10.5 15.5 20.5 25.5 30.5 35.5 40.5 45.5 50.5 Note: A packaging quantity is delivered by the bag unit (100 pcs.).
sSingle Row Pin Header
Contact Inserted
Part Number DF5A- 2P-5DSA DF5A- 3P-5DSA DF5A- 4P-5DSA DF5A- 5P-5DSA DF5A- 6P-5DSA DF5A- 7P-5DSA DF5A- 8P-5DSA DF5A- 9P-5DSA DF5A-10P-5DSA
CL No. 676-0016-9 676-0017-1 676-0018-4 676-0019-7 676-0020-6 676-0021-9 676-0022-1 676-0023-4 676-0024-7
Number of Contacts
2 3 4 5 6 7 8 9 10
C 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0
D 12.5 17.5 22.5 27.5 32.5 37.5 42.5 47.5 52.5
Note: A packaging quantity is delivered by the bag unit (100 pcs.).
B87
sDouble Row Socket
Contact Inserted
Part Number DF5A- 4DS-5C DF5A- 6DS-5C DF5A- 8DS-5C DF5A-10DS-5C DF5A-12DS-5C DF5A-14DS-5C DF5A-16DS-5C
CL No. 676-0025-0 676-0026-2 676-0027-5 676-0028-8 676-0036-6 676-0037-9 676-0038-1
Number of Contacts 4 6 8 10 12 14 16
E 5.0 10.0 15.0 20.0 25.0 30.0 35.0
F 10.5 15.5 20.5 25.5 30.5 35.5 40.5 Note: A packaging quantity is delivered by the bag unit (100 pcs.).
sDouble Row Pin Header
Part Number DF5A- 4DP-5DSA DF5A- 6DP-5DSA DF5A- 8DP-5DSA DF5A-10DP-5DSA DF5A-12DP-5DSA DF5A-14DP-5DSA DF5A-16DP-5DSA
CL No. 676-0029-0 676-0030-0 676-0031-2 676-0032-5 676-0033-8 676-0034-0 676-0035-3
Number of Contacts 4 6 8 10 12 14 16
G 5.0 10.0 15.0 20.0 25.0 30.0 35.0
H 12.5 17.5 22.5 27.5 32.5 37.5 42.5 Note: A packaging quantity is delivered by the bag unit (100 pcs.).
B88
BPCB mounting pattern (Board thickness = 1.60.1)
DF5A-*P-5DSA
DF5A-*DP-5DSA
Note 1. For C and G sizes, please refer to pages where individual product patterns are shown.
BApplication Pattern
sSocket Crimping Contact
Part Number DF5-1822SCF(51) DF5-1822SC(51) DF5A-1822SCF(51)
HRS. No. 676-0001-1-51 676-0002-4-51 676-0003-7-51
Applicable Cable UL style Jacket dia. AWG size Contact construction 1007 1015 1.5 to 2.2 AWG#18 43 cores/0.16mm AWG#20 21 cores/0.18mm 2.2 to 3.2 AWG#22 17 cores/0.16mm
Packaging Type Reel Bag Reel Bag
Quantity 5,000 100 5,000 100
J 2.8 3.8
K 3 4
DF5A-1822SC(51) 676-0004-0-51
Note 1. The applicable cable conductor is a tin plated and annealed copper wire. Note 2. If other cables are used instead of the applicable cable, contact the HRS Sales Department.
BApplicable Crimping Tools
Type Item Press unit Automatic Applicator Part Number CM-105 AP105-DF5-1822S AP105-DF5A-1822S DF5-1822/CR-HT DF5A-1822/CR-HT RP13-PC-TP CL No. 901-0005-4 901-4542-5 901-4546-6 550-0264-0 550-0265-2 150-0021-5 Applicable Contact -----------------------------DF5-1822SCF(51) DF5A-1822SCF(51) DF5-1822SC(51) DF5A-1822SC(51) DF5/DF5A-1822SCF(51)
Manual -----
Manual crimping tool Extraction tool
Note: If any trouble has been caused due to other tools, which are not designated by Hirose, Hirose won't guarantees any product.
B89
BPrecautions
1. Recommended soldering condition 2. Cleaning condition 3. Connecting condition 4. Cautions
Flow: 250c for 5 seconds Manual soldering: 290c for 3 seconds
Refer to the "Nylon Connector Use Hand book" Refer to the "Nylon Connector Use Hand book" sThe color phase of this product may be slightly differ from that of the formed product according to the manufacturing lot, and consequent storage condition, however, the difference affects no performance.
B90

▲Up To Search▲

Price & Availability of DF5A-10DS-5C

	To Download DF5A-10DS-5C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .